ADLINK cPCI-3510 Series User Manual
Page 22

8
Specifications
Serial Ports
• Up to four serial ports
• One RS-232/422/485 serial port on 8HP front panel
(cPCI-3510D/G/L)
• Additional RS-232 10-pin header on layer-2 board
(cPCI-3510G only)
• Up to two RS-232/422/485 COM port (cPCI-3510M only)
PMC/XMC
• One 32-bit/66MHz PMC site or PCIe x1 XMC site if
DB-3UMC daughter board is installed
Audio
• Line-in/Line-out on front panel by Realtek ALC262 High
Definition Audio codec (cPCI-3510D only)
• Line-in/Line-out on front panel by 100-pin connector
(cPCI-3510M only)
TPM
Atmel AT97SC3204 TPM (upon request) supporting:
• Over/Under voltage detection
• Low/High frequency sensor/filter
• Reset filter
• Memory encryption/decryption
Storage
Interfaces
1
• CFast socket on daughter board
• Optional onboard SSD on daughter board
• One SATA 6Gb/s direct connector for 2.5" onboard HDD/SDD
(8HP/12HP version only)
BIOS
• AMI® EFI BIOS, 64Mbit SPI flash memory
OS
Compatibility
• Microsoft Windows 7 32/64-bit
• Microsoft Windows 8 32/64-bit
• Red Hat Enterprise Linux 6.4, 64-bit
• Fedora 14, 32-bit
• VxWorks 6.9
• Real Time RTX (MSI)
• Other OS support upon request
Environmental
• Operating Temperature (with forced air flow)
2
:
Standard: -20°C to 70°C
Extreme temperature: -40°C to +85°C (for Intel® Core™
i5 and Intel® Core™ i7-4700EQ processor with cTDP
down and forced air flow)
• Storage Temperature: -50°C to 100°C
• Humidity: 95% @60°C non-condensing
• Shock: 20G peak-to-peak, 11ms duration, non-operating
• Vibration
3
: 2Grms, 5-500Hz, each axis, operating (w/o hard
drive)
EMI
• CE EN55022
• FCC Class A
Table 2-1: cPCI-3510 Processor Blade Specifications