ADLINK aTCA-N700 - Manual (Page 7)

Switch Manager Configuration Guide
7
2 Installation
The following procedure is for Switch Manager installation on an ADLINK ATCA blade.
1. Tranfer the file "Switch_Manager_0.3.0.tar.gz" onto the blade and extract it.
2. Run the script “install.sh” to install the Switch Manager.
[root@ATCA-N700 /home]# ls
Switch_Manager_0.3.0.tar.gz
[root@ATCA-N700 /home]# tar -xzvf Switch_Manager_0.3.0.tar.gz
[root@ATCA-N700 /home]# cd Switch_Manager_0.3.0
[root@ATCA-N700/home/Switch_Manager_0.3.0]# ./install.sh
Old start-up config will be cleared. Please make sure that it has been backuped!
Continue to install? (y/n): y
Stoping Broadcom Switch Software .OK
Begin to install...
Starting Broadcom Switch Software .................. OK