ADLINK aTCA-9700 - Manual (Page 73)

73
6.5 Server Mgmt Setup Screen
You can use this screen to specify options for the Server Management settings. Use
the up and down keys to select an item. Use <+> and <-> keys to change
the value of the selected option. The settings are described in the following pages.
The screen is shown as below.
BMC Self Test Status
It shows the BMC Self Test Status
POST Watchdog Timer
It is for enabling or disabling POST Watchdog timer.
POST Watchdog timeout
It can select the value between 3 to 6 min for FRB-2 timer expiration value.
OS Load Watchdog Timer
If enabled, starts a BIOS timer which can only be shut off by Intel Management
software after the OS loads.
OS Load Watchdog Timeout
If is for configuring the length of the OS boot watchdog timer. Not available if OS boot
watchdog timer is disabled.