ADLINK aTCA-9700 - Manual (Page 19)

19
3.1.4 Silicon Motion SM750 Graphics Controller
The aTCA-9700 provides an analog VGA port on the front panel powered by a Silicon Motion
SM750 2D graphics controller with the following features:
•
PCI-Express x1 architecture
• 16MB integrated video DDR memory
• Low power consumption < 1.5W
• 300 MHz DAC supports up to 1920x1440 resolution
• 128-bit 2D graphic engine
• ROPs, BitBLT, transparent BLT, pattern BLT, Color expansion, and Line drawing
• YUV-16/32-bit RGB conversion
• Support 7 layers of display frames (2 hardware cursors, primary graphic, video, video
alpha, alpha, and secondary graphic)
• Two 8-bit portsorone16-bitvideocaptureportsupportsITU601
• and ITU 656 specifications UV-16/32-bit RGB conversion
• ReduceOn Power Management Technology
• Quick-Rotation features allow for 90°, 180°, and 270° rotation of on-screen images
3.2 Peripherals
The following peripherals are available on the aTCA-9700 blade
3.2.1 Reset
The aTCA-9700 is automatically reset by a precision voltage monitoring circuit that detects a
drop in voltage below the acceptable operating limit of 4.85V for the 5V line and below 3.2V for
the 3.3V line. Other reset sources include the Watchdog Timer, the face plate push-button
switch and also the RESET signal from the IPMC. The aTCA-9700 responds to any of these
sources by initializing local peripherals.
A reset will be generated by the following conditions:
ƒ Power failure, +5 V supply falls below 4.1 V (typ.) or +3.3 V supply falls below
2.93 V (typ.)
ƒ Pushbutton "RESET" pressed
ƒ Watchdog time-out
ƒ IPM controller reset