Flow control, Vt-utf8 combo key sup, Recorder mode – ADLINK aTCA-9700 User Manual
Page 62: Legacy os redirection, Putty keypad, Redirection after bios, Terminal type, Bits per second, Data bits
62
Flow Control
Set this option to select Flow control for console redirection.
VT-UTF8 Combo Key Sup
This option is used for enabling or disabling VT-UTF8 Combo key.
Recorder Mode
This option is used for enabling or disabling Recorder Mode.
Resolution 100x31
This option is used for enabling or disabling resolution 100x31 support.
Legacy OS Redirection
This option is used for configuring the legacy OS text format for proper display if
system boots to legacy OS with console redirection enabled.
Putty KeyPad
This option allows configuring the format of keypad when console redirection is
enabled.
Redirection After BIOS
This option allows user to configure the console redirection mode via serial port after
BIOS POST OK.
Terminal Type
VT-UTF8 is the preferred terminal type for out-of-band management. The next best
choice is VT100+ and then VT100.
Bits per second
Select the bits per second that you want serial port to use for console redirection.
Flow Control
Set this option to select Flow control for console redirection.
Data Bits
This option allows to select the data bits you want the serial port to use for console