ADLINK HSL-DO32-M-N/HSL-DO32-M-P - Manual (Page 47)

34 HSL Master Controller
2.3 Configuration
2.3.1 SW1 (PMC-7852/G only)
Figure 2-4: SW1 – Transmission Rate Setting
Default: 6 Mbps.
2.3.2 JP 1, 2, 3, 6 / JP 4, 5 (PMC-7852/G only)
Figure 2-5: Top View of PMC-7852/G, for JP 1, 2, 3, 4, 5, 6 jumper settings.
No. Set transmission rate
1 OFF ON OFF ON
1st Master Controller
2 OFF OFF ON ON
3 OFF ON OFF ON
2nd Master Controller
4 OFF OFF ON ON
Rate 12M 6M 3M EXC