3 hsl series products, Hsl series products, 12 introducing hsl – ADLINK HSL-DO32-M-N/HSL-DO32-M-P User Manual
Page 25: Table 1-2: slave i/o modules, Table 1-3: remote motion modules
12
Introducing HSL
1.3 HSL Series Products
HSL Master controller boards
See HSL Master Board on the previous section.
At least one master controller card is needed for an HSL sys-
tem. With PCI-7854 or PMC-7852/G, two master controllers are
available. A maximum of 12 cards are supported for a single
computer system.
Slave I/O modules
A variety of HSL slave I/O modules are available.
Table 1-2: Slave I/O modules
Note:
Start Index Setting Range means range of the start index
address of DIP switch setting. Full duplex and half duplex
mode have different ranges.
The following remote motion control modules are also sup-
ported:
Table 1-3: Remote Motion modules
Series
Model
Discrete
Input
Discrete
Output
Analog
Input
Analog
Output
Start Index
Setting Range
Slave Index
Occupation
DB
HSL-DI32-DB-N/P
32
(1,3, 5, …,61)
2
HSL-DO32-DB-N/P
32
(1,3, 5, …,61)
2
HSL-DI16DO16-DB-N/P
16
16
1-63
1
M
HSL-DI32-M-N/P
32
(1,3,…,61)
2
HSL-DO32-M-N/P
32
(1,3,…,61)
2
HSL-DI16DO16-M-NN/NP/PN//PP
16
16
1-63
1
HSL-R8DI16-M-N/P
16
8 relay
1-63
1
HSL-AI16AO2-M-VV
16
2
1-61 2
HSL-AI16AO2-M-AV
16
2
1-61 2
U
HSL-DI16DO16-US/UJ
16
16
1-63
1
HSL-DI16-UL
16
1-63
1
HSL-AO4
4
1-62
2
Series
Model
Axes
Interface
Start Index
Setting Range
Slave Index
Occupation
Motion
HSL-4XMO-CG-N/P
4
General series 1~60 for Half Duplex
1~57 for Full Duplex
4
HSL-4XMO-CD-N/P
4
D-sub