beautypg.com

C.1 before you proceed, Appendix c hsl-ai16ao2 calibration, Before you proceed – ADLINK HSL-DO32-M-N/HSL-DO32-M-P User Manual

Page 130

background image

HSL-AI16AO2 Calibration

117

Appendix C HSL-AI16AO2 Calibration

C.1 Before you proceed

Before calibrating the HSL-AI16AO2-M-VV and HSL-AI16AO2-M-
AV, take note of the following:

1. Make sure that the signal type is single-ended. You may

set this via the jumper.

2. Use a precise calibrator that can generate a precise 5 V.

3. Check the status text to know if the calibration is suc-

cessful or not.

4. Refer to the analog input field configuration below.

See also other documents in the category ADLINK Hardware: