ADLINK PXI-3980 - Manual (Page 34)

22 Getting Started
and wait for 5 seconds, then return the switch to Normal
position.
4. Remount the controller into the PXI chassis.
5. Press "Delete" or "F2" to enter the BIOS setup when the
splash logo appears.
6. Press "F3" to load Optimized defaults in BIOS setup
7. Modify the system date and time
8. Press "F4" to save configuration and exit
2.3.16 Initiating Backup BIOS Flash
BIOS flash on the PXI-3980 is divided into Backup and Normal
sections.
In the event of a system malfunction causing the PXI-3980 to halt
or fail to boot, and clearing the CMOS fails to resolve the issue,
the BIOS flash backup switch (see Section 2.3.10 Onboard Con-
nections and Settings) can enable the backup BIOS flash. To initi-
ate BIOS flash backup, move the switch from Normal position
to Backup
NOTE: NOTE:
Please contact technical support to resolve halting or failure to
boot issues caused by corrupted BIOS.
2
B
2
B