13 replacing the hard drive or solid state drive, Replacing the hard drive or solid state drive – ADLINK PXI-3980 User Manual

Page 31

Text mode
Original mode

Getting Started

PXI-3980

4. Elevate the latch until the PXI-3980 is fully seated in the

chassis backplane.

5. Fasten the four mounting screws on the faceplate of

PXI-3980, and connect all peripheral devices.

2.3.13 Replacing the Hard Drive or Solid State Drive

The PXI-3980 provides a SATA 2.0 port with a pre-installed 2.5"
SATA hard drive or solid state drive. Replacing the HDD or SSD is
accomplished as follows.

1. Locate the four screws attaching the drive to the

bracket on the side of the PXI-3980.

2. Remove the screws, as shown.