ADLINK PXI-3980 - Manual (Page 23)

Getting Started 11
PXI-3980
2.3.3 DVI-I Connector
The DVI-I connector connects the PXI-3980 to a monitor, of which
both digital (DVI) and analog (VGA) are supported. If connecting
to an analog (VGA) monitor, the included Y-cable must be
installed on the DVI-I connector.
Dual display function, providing simultaneous DVI & VGA display,
is available, also with the addition of the included ADLINK Y-cable.
NOTE: NOTE:
The PXI-3980 supports native monitor hot-plugging in DVI-D
monitors, under Windows 7 with Intel Media Accelerator graph-
ics driver installed, and in VGA monitors with the included
ADLINK Y-cable.
Pin Signal Pin Signal Pin Signal Pin Signal
1
TMDS
Data2-
9
TMDS
Data1-
17
TMDS
Data0-
C1
Analog
Red
2
TMDS
Data2+
10
TMDS
Data1+
18
TMDS
Data0+
C2
Analog
Green
3
Shield
Ground
11
Shield
Ground
19
Shield
Ground
C3
Analog
Blue
4 Reserved 12 Reserved 20 Reserved C4
Analog
HSYNC
5 Reserved 13 Reserved 21 Reserved C5
Analog
Ground
6 DDC Clock 14 +5V Power 22 Ground
7 DDC Data 15 Ground 23
TMDS
Clock+