ADLINK PXI-3980 - Manual (Page 33)

Getting Started 21
PXI-3980
inserted under the positive retaining clip, and then
pushed downward at the negative retaining clip. The bat-
tery should easily snap into position.
5. Reinstall the embedded controller into the PXI chassis
and restore power.
2.3.15 Clearing CMOS
In the event of a system malfunction causing the PXI-3980 to halt
or fail to boot, clear the CMOS and restore the controller BIOS to
its default settings. To clear the CMOS:
1. Shut down the controller operating system and turn off
the PXI Chassis.
2. Remove the PXI-3980 from the chassis. Observe all
anti-static precautions.
3. Locate the CMOS clear switch (SW1) on the board (see
Section 2.3.10 Onboard Connections and Settings).
Move the switch from Normal position
to Clear position
2
B
2
B