ADLINK PXI-3980 - Manual (Page 16)

4 Introduction
Memory
X
Two standard 204-pin DDR3 SODIMM sockets
X
Support for +1.5 V DDR3, 1066/1333 MHz RAM up to 16
GB total
X
Support for non-ECC unbuffered memory
Video
X DVI output supporting up to 1920x 1200 @ 60 Hz resolution
X VGA output for analog CRT route to DVI-I connector on the
faceplate, supporting up to 2048 x 1536 bpp at 75Hz
X
DVI-I connector for dual digital and analog video signal out-
put via the included ADLINK Y-cable
Hard Drive
Built-in 2.5” 500 GB 7200 RPM SATA hard drive or 120GB SATA
solid state driver
I/O Connectivity
Dual Gigabit Ethernet controllers through two RJ-45 connectors
with speed/link/active LED on the faceplate, with upper connector
supporting Wake on LAN.
USB
Four USB 2.0 and two USB 3.0 ports on the faceplate.
GPIB
Onboard IEEE488 GPIB controller through Micro-D 25-pin con-
nector on the faceplate.
NOTE: NOTE:
The externally accessible SODIMM socket can accept replace-
ment DDR3 DRAM DIMM modules.
PXI-3980 specifications and stability guarantees are only sup-
ported when ADLINK-provided DDR3 DRAM DIMM modules
are used.