ADLINK PXI-3980 - Manual (Page 30)

18 Getting Started
Flat-head screwdriver
Anti-static wrist strap
Anti-static mat
ADLINK PXI-3980 system controllers are electrostatically sen-
sitive and can be easily damaged by static electricity. The
equipment must be handled on a grounded anti-static mat, and
operators must wear an anti-static wristband, grounded at the
same point as the anti-static mat.
Inspect the carton and packaging for damage. Shipping and
handling may cause damage to the contents. Ensure that all
contents are undamaged before installing.
2.3.12 Installing the PXI-3980
1. Locate the system controller slot (Slot 1)
2. Depress the red locking lever and release the latch
3. Align the controller’s top and bottom edges with the card
guides, and carefully slide the PXI-3980 into the chassis,
as shown
CAUTION:
All equipment must be protected from static discharge
and physical shock. Never remove any of the socketed
parts except at a static-free workstation. Use the anti-
static bag shipped with the product to handle the equip-
ment and wear a grounded wrist strap when servicing or
installing.