D-Link DI-724GU User Manual

Page 40

Section 3 - Conﬁguration

LAN

The IP address of your router on the local

area network. Your local area network

settings are based on the address assigned

here. For example, 192.168.0.1.

The subnet mask of your router on the local

area network.

This entry is optional. Enter a domain name

for the local network. The DHCP server will

give this domain name to the computers

on the LAN. So, for example, if you enter

mynetwork.net here, and you have a PC

with a name of chris, that PC will be known

as chris.mynetwork.net. Note, however, if

the router’s WAN settings specify Dynamic

IP Address, and the ISP’s DHCP server

assigns a domain name to the router, that

domain name will override any name you

enter here.

Enable RIP if required by the ISP, if the LAN

has multiple routers, or if the LAN has auto-

IP devices.

This router supports both version 2 and

version 1 of the RIP speciﬁcation.
V1. Use if none of the routers supports Version 2.
V2 Broadcast. Use if some routers are capable of Version 2, but some are only capable of Version 1.
V2 Multicast. Use if this is the only rounter on the LAN or if all the routers support Version 2.

IP Address:

Subnet Mask:

Local Domain

Name:

Enable RIP:

RIP Operating

mode: