D-Link DI-724GU - Manual (Page 36)

36 D-Link DI-724GU User Manual
Section 3 - Configuration
L2TP
L2TP (Layer Two Tunneling Protocol) uses a
virtual private network to connect to your ISP.
This method of connection requires you to
enter a Username and Password (provided by
your Internet Service Provider) to gain access
to the Internet. The ISP provides the values for
L2TP IP Address, L2TP Subnet Mask , L2TP
Gateway IP Address, and L2TP Server IP
Address (may be the same as the gateway).
If your ISP has assigned a fixed IP address,
select Static IP and enter the fixed IP address
in the following field. For PPTP and L2TP,
the subnet mask and the default gateway IP
address must also be entered. If the ISP’s
servers assign these values upon establishing
a connection, select Dynamic IP.
When required, this value is provided by the
ISP.
When required, this value is provided by the
ISP.
When required, this value is provided by the
ISP.
When required, this value is provided by the
ISP.
This value is provided by agreement between
you and the ISP.
L2TP:
Dynamic IP/Static IP:
IP Address:
Subnet Mask:
Default Gateway:
Server IP Address:
Username: