D-Link DI-724GU - Manual (Page 34)

34 D-Link DI-724GU User Manual
Section 3 - Configuration
PPTP
PPTP (Point to Point Tunneling Protocol) uses
a virtual private network to connect to your ISP.
This method of connection is primarily used in
Europe. This method of connection requires
you to enter a Username and Password
(provided by your Internet Service Provider) to
gain access to the Internet. The ISP provides
the values for PPTP IP Address, PPTP
Subnet Mask , PPTP Gateway IP Address,
and PPTP Server IP Address (may be the
same as the gateway).
If your ISP has assigned a fixed IP address,
select Static IP and enter the fixed IP address
in the following field. For PPTP and L2TP,
the subnet mask and the default gateway IP
address must also be entered. If the ISP’s
servers assign these values upon establishing
a connection, select Dynamic IP.
When required, this value is provided by the
ISP.
When required, this value is provided by the
ISP.
When required, this value is provided by the
ISP.
When required, this value is provided by the
ISP.
This value is provided by agreement between
you and the ISP.
PPTP:
Dynamic IP/Static IP:
IP Address:
Subnet Mask:
Default Gateway:
Server IP Address:
Username: