D-Link DI-724GU - Manual (Page 26)

26 D-Link DI-724GU User Manual
Section 3 - Configuration
This gives you the option to turn off the
wireless portion of the router. By default this
feature is on.
Service Set Identifier (SSID) is the name
designated for a specific wireless local
area network (WLAN). The SSID’s facto-
ry default setting is “dlink”. The SSID can
be easily changed to connect to an exist-
ing wireless network or to establish a new
wireless network.
6 is the default channel. All devices on the
network must share the same channel.
Note: The wireless adapters will automatically
scan and match the wireless setting.
The default Super G setting is Super G with Dynamic Turbo. Super G is a group of performance enhancement features
that increase end user application throughput in an 802.11g network. Super G is backward compatible to standard 802.11g
devices. For top performance, all wireless devices on the network should be Super G capable. Select either Disabled,
Super G without Turbo, Super G with Dynamic Turbo, or Super G with Static Turbo.
This allows you to specify the rate at which wireless clients are allowed to connect to the router at. Default is set to Auto.
If all of the wireless devices you want to connect with this router can connect in 802.11g mode, you can improve performance
slightly by enabling this mode. If you want to connect 802.11b devices to this router, leave this option disabled.
Wireless
Wireless Radio:
SSID:
Channel:
Super G ™ Mode:
Transmission Rate:
802.11g Only
Mode: