Acrosser AR-B1894 - Manual (Page 40)

4.2.6PnP/PCI Configurations
4.2.6.1 Init Display First
This item allows you to decide to active whether PCI Slot or Onboard/AGP first.
4.2.6.2 Reset Configuration Data
Normally, you leave this field Disabled. Select Enabled to reset Extended System
Configuration Data (ESCD) when you exit Setup if you have installed a new add-
on and the system reconfiguration has caused such a serious conflict that the
operating system cannot boot.
4.2.6.3 Resources Controlled By
The Award Plug and Play BIOS has the capacity to automatically configure all of
the boot and Plug and Play compatible devices. However, this capability means
absolutely nothing unless you are using a Plug and Play operating system such
as Windows
®95. If you set this field to “manual” choose specific resources by
going into each of the sub menu that follows this field.