Acrosser AR-B1894 - Manual (Page 3)

How to Use This Manual
This manual is written for the system integrator, PC technician and
knowledgeable PC end user. It describes how to configure your AR-B1894 to
meet various operating requirements. The user’s manual is divided into four
chapters, with each chapter addressing a basic concept and operation of the
server board.
Chapter 1: Introduction - presents what you have inside the box and gives you
an overview of the product specifications and basic system architecture for the
AR-B1894 server board.
Chapter 2: Hardware Configuration Setting -
shows the definitions and
locations of Jumpers and Connectors so that you can easily configure your
system.
Chapter 3: System Installation - describes how to properly mount the CPU,
main memory, and M-System Flash disk for a safe installation. It will also
introduce and show you the driver installation procedure for the Graphics
Controller and Ethernet Controller.
Chapter 4: BIOS Setup Information - specifies the meaning of each setup
parameter, how to get advanced BIOS performance and update to a new BIOS.
Note:
(1) Memory type support dual-channel interleaved mode assuming DDR2
533 MHz, all DIMMs in a system must be of the same type, the speed in
all channels is the speed of the slowest DIMM in the system.