3DLABS Oxygen 402 - Manual (Page 18)

12 Dynamic Pictures Oxygen 3D Family
If you have already installed your new Oxygen card :
•
Select the “Yes...” radio button (Figure 6); and
•
Click “Finish”. Your computer will be restarted and you
can begin using your new Oxygen 3D graphics
accelerator!
14. Once your Oxygen hardware and software are installed, refer to the
Performance Tuning section on page 23 for tips about how to
optimize your Oxygen card performance while running your
application. It is important to note that not all resolution settings
offer accelerated 3D performance.
For a list of supported Oxygen
resolutions, refer to the Monitor Resolution Tables on page 38.
Figure 6: Finish Setup