D-Link DSL-1500G User Manual
Page 30
DSL-1500G SHDSL Ethernet Router User’s Guide
20
Clicking the index number of an existing profile or the index number of an undefined profile brings up the
Connection Profile Configuration menu:
Add/Change Connection Profile
NOTE: The VPI and VCI numbers are assigned by the network service
provider. These values should not be changed unless you are instructed to do
so. Incorrect VPI or VCI settings will not allow the device to connect to the
WAN.
To add a new profile or change an existing one, change the following parameters:
Profile Name
Type in a new name for this profile.
VPI
Type in the new VPI setting (0-255) if this needs to be changed.
VCI
Type in the new VCI setting (32-65535) if this needs to be changed.
Connection Type
From the drop-down menu, select an encapsulation option: Router with
PPPoA, Router with PPPoE, Router with IPoA or Bridge with RFC 1483.
When all the changes have been made, click on the OK button. You will be prompted to save the changes and
reboot the device in a new window: