beautypg.com

Adding and changing connection profiles – D-Link DSL-1500G User Manual

Page 29

background image

DSL-1500G SHDSL Ethernet Router User’s Guide

19

Adding and Changing Connection Profiles

Use the Connection Profile menu to add new profiles or change existing profiles. Creating a new connection
profile is necessary if your DSL service uses protocols that are not offered through the default Router/Bridge
Configuration menu. If it is necessary to change the PVC settings (the VPI and VCI values) for the DSL
connection, this is done using the Connection Profile menu. Do not change the VPI or VCI values unless you
receive explicit instructions to do so from your service provider. When a new connection profile is created it is
necessary to save the new profile and reboot the device before it can be selected in the Configuration menu.

To create a new Connection Profile: click any hyperlinked index number for an undefined profile
from the list, a new menu appears (see below).

To change an existing Connection Profile: click the hyperlinked index number the listed profile, a
new menu appears (see below).

NOTE: Connection profiles additions and changes must be saved and the
device must be rebooted before it can be used in the Router/Bridge
Configuration menu.

Connection Profile menu

The Connection Profile menu lists existing profiles. To change an existing profile click on the number for that
profile, the menu will appear. To add a new profile, click on an unused number to see the Connection Profile
Configuration menu. A profile may be deleted by clicking on the Delete button for that profile. If a profile is
deleted, this change must be saved or the configuration will remain in the non-volatile RAM of the Router.

The information displayed in the Connection Profile list is described below.

Profile Name

The name of the listed connection profile. Profile names may be up to 16
characters long with no spaces.

VPI

This is the Virtual Path Identifier for the profile. This is used to direct
data along a dedicated path on the ATM network backbone.

VCI

This is the Virtual Circuit Identifier for the profile. This is used to direct
data along a dedicated circuit within the listed VPI on the ATM network
backbone.

Connection Type

This is the protocol used (PPPoA, PPPoE, RFC 1483 or IPoA) and
device type (Router or Bridge) configured for the profile.