Q-See QR404 - Manual (Page 37)

QR404 User Manual
33
(Picture 73)
(Picture 75)
(Picture 76)
② Alarm
The [Alarm] tab in the Setup menu allows you to control the alarm options on the individual channels remotely via the
Net Viewer program (Picture 73). Clicking on the drop down list of the I/O Alarm option for each Channel on the
[Alarm] tab (Picture 73) will generate an Alarm Schedule interface which will allow you to configure the specific
parameters of your alarm scheduled recording (Picture 74). Refer to Section 5.2.2 of this User Manual for a more
thorough explanation of alarm triggered recording.
Other options that you can configure on the [Alarm] tab of your Setup menu include the parameters of motion detect
recording, video loss notification, HDD space notification, HDD loss notification, and your alarm output and record
time settings. For more details on how to configure the options of these specific features, refer to Section 5.2.7.2 of
this User Manual.
③ PTZ Control
The [PTZ] tab in the Setup menu (Picture 75) will allow you to control the
specific options related to your PTZ camera such as the PTZ Camera
Protocol, PTZ Camera location (address), Baud Rate and Data and Stop
Bit parity preferences. For a more thorough explanation of your PTZ
camera controls, please refer to Section 5.2.7.4 of this User Manual.
④ Network
The [Network] tab in the Setup menu (Picture 76) will allow you to
control the specific network configuration options. To ensure proper
Network configuration settings, you should refer to Section 5.2.3 of this
User Manual.
(Picture 74)