Q-See QR404 - Manual (Page 22)

QR404 User Manual
18
• Date is depicted in upper right hand corner as illustrated in Picture 27. Date represents the date current file
selection was recorded.
• The 24H recorded time line under the Date represents the time line base for recorded material.
• The 0~60 Minute recording time quantum represents the minute base for all recorded materials. As
depicted in Picture 30, the green bar represents the time length of the recorded material in the file you are
currently playing.
Recorded File Menu Commands
(Figure 1)
1 Play 10 All the windows
2 Previous recording file 11 Add window
3 Pause 12 Start
4 Stop 13 Cut
5 Previous frame / Next frame 14 Delete
6 Slow play, Normal play, Fast Play 15 Convert AVI
7 Next Hour 16 On Screen Display
8 Capture picture 17 Mute switch
9 Reduce window 18 Volume adjust
Video Play Settings: In your Multimedia player interface, got to the Setting menu on your toolbar. From there, go to
Video Play Setting Normal Video Bar (Picture 28). This will open up a dialog as illustrated in Picture 29 allowing
you to choose from a drop down list of which channels to play. Make your choice from the options provided in the
drop down list and click next to “Play the Video”. Click Apply then OK.
Audio Settings: In your Multimedia player interface, go to the Setting menu on your toolbar. From there, go to
Setting Audio Channel SettingNormal Video Bar (Picture 30). This will open up a dialog as illustrated in Picture
31 allowing you to choose from a drop down list of which audio channels to play. Make your choice from the options
provided in the drop down list and click next to “The channel has sound data”. Click Apply then OK. Please
note that these setting changes will not take effect until you re-start your multimedia player.
(Picture 28) (Picture 29)
(Picture 30) (Picture 31)