Dakota Digital MCL-2002 - Manual (Page 10)

MAN# 650280:D
WIRING COLOR CODE FOR GAUGE:
2003 and older HD
MCL-2002* Stock harness color Function
YELLOW PINK or YELLOW/BLUE* tachometer signal
PINK BLACK/YELLOW “ENGINE” indicator (-)
BLACK BLACK ground (connect directly to battery negative)
WHITE/BLUE connected to function switch
WHITE WHITE/GREEN output speed signal
GRAY WHITE VSS signal
PURPLE BROWN/VIOLET security system indicator
WHITE/RED +12v constant power
RED ORANGE/WHITE +12 volt with key on
WHITE/BLUE connected to function switch
WHITE/BLACK BLACK VSS ground
WHITE/PURPLE RED VSS power
BLUE temperature sensor signal
BLACK temperature sensor ground
PURPLE WHITE high beam indicator(+)
WHITE/GREEN TAN neutral indicator(-)
GRAY pressure sender
ORANGE VIOLET left turn indicator(+)
GREEN BROWN right turn indicator(+)
BROWN GREEN/YELLOW oil warning indicator(-)
*To avoid damage to motorcycle, please see Speedometer, Tachometer, and Status and Warning Indicators sections for details on locating
VSS, Tachometer, and indicator wires for most motorcycle applications
TECHNICAL SPECIFICATIONS
Switched input voltage:
6.5 – 22V, 0.15A typical current draw
Battery input voltage: 6.3 – 22V, 0.0001A typical current draw
Speed input signal: > 1.4Vp-p sine wave or square wave
Tach input, 12 HI: low < 3.0V and high > 7.6V
Tach input, 5 LO: low < 1.0V and high > 4.0V
High beam, Left turn, or Right turn: > 4.0V active, < 1.6V off
Neutral, Engine, or Low oil:
< 1.6V active, > 4.0V off