Dakota Digital LED Tail Lights LAT-NR221 - Manual

MAN#650209
INSTALLATION INSTRUCTIONS
LAT-NR221
LED Tail Lights for 1958 Chevy Bel Air/Biscayne
and 1961-1967 Corvette
MAN#650209
Kit Includes:
Installation:
1. Remove the two screws and tail light lens.
2. Remove the light bulb.
3. Push and twist to remove the plastic wire socket from the back side of the housing.
4. Now is a good time to clean the lens and housing. If lenses are in bad shape a new set is
recommended.
5. Remove the nut and round metal spacer from the back of the new LED assembly.
6. Insert the new LED assembly through the hole where the original bulb and connector were.
Gently pull the wires through the opening to avoid damaging the wire insulation.