To change the display in playback mode, About cassette tapes – Aiwa XR-M88 User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

DISPLAY

SHIFT

To change the display in playback mode

Press the DISPLAY button while pressing the SHIFT button on

the remote control.

Each press on the button changes the display in the following

order:

[->© Level indicator
'—@ Tape counter

(Example: TAPE 0185)

About cassette tapes

• To prevent accidental erasure, break off the plastic tabs on

the cassette tape after recording with a screwdriver or other
pointed tool.

Side A

To record on the tape again, cover the tab openings with
adhesive tape, etc. (On Type II tapes, take care not to cover

the Type II tape detection slot.)

• 120-minute or longer tapes

are extremely thin and easily

deformed or damaged. They are not recommended.

• Take up any slack

in the tape with a pencil or similar tool

before use. Slack tape may breaker jam in the mechanism.

ENGLISH