Loading a tape, To select a reverse mode, Playing back a tape – Aiwa XR-M88 User Manual

Page 13: About the level indicator, To set the tape counter to 0000, Operation, Тире, Тире 0000

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TAPE PLAYBACK

OPERATION

LOADING A TAPE

»You can select a reverse mode to play back one or both sides.
• Use Type I (normal) , Type II (high/CrOa) or Type IV (metal)

tapes for playback.

Press the TAPE button on the remote control (or
press the FUNCTION button on the CD/tape unit
repeatedly until “TAPE” appears on the display.)

Then insert a tape with the exposed side facing to

the right and push it gently until it is loaded
automatically inside the unit.

To select a reverse mode

Press the TAPE button on the remote control.
Each time the button is pressed, the reverse mode changes.

PLAYING BACK A TAPE

Load a tape.

Press the button on the CD/tape unit or the

button on the remote control.

Playback side of the tape

.........ГИРЕ 0000'

a a.

The tape counter indicates the tape

running length. (It disappears when no

tape is inserted.)

C>; The side facing upward is being played (forward).

<1: The side facing downward is being played (reverse).

About the level indicator

The above display automatically changes to the level indicator

after 4 seconds.

The level indicator shows an approximate playback sound level.

ТИРЕ

To stop play,

press the ■ button.

To pause play,

press the II button. To resume play, press again.

To change the playback side,

press the button on the

CD/tape unit or the ► button on the remote control in play or

pause mode.

To fast forward or rewind,

press the ◄◄ or ►>- button in stop

mode. Then press the ■ button to stop the tape.

To eject the loaded tape,

press the — TAPE EJECT button in

stop mode.

To start play when the power is off (Direct Play

Function)

Press theTAPE button on the remote control. The power is turned

on and play of the loaded tape begins.

To set the tape counter to 0000

Press the ■ button in stop mode.
The counter is also set to 0000 when the tape is ejected.

^ z:>

сиз

fZT

ТИРЕ 0000

To play one side only, select Z.

To play from the side facing upward to the opposite side once

only, select T3.
To play both sides repeatedly, select CZ).

ENGLISH