Aiphone IE-2AD(U) - Manual (Page 2)

a
BEFORE YOU INSTALL AND OPERATE THE EQUIPMENT
— Prohibitions and precautions —
Operation;
DO NOT HOLD HOOK SWITCH DOWN WHILE PICKING UP HANDSET. THE CHIME TONE
SOUNDS THROUGH THE HANDSET RECEIVER ELEMENT AND COULD CAUSE HEARING
DAMAGE.
Installation;
* DO NOT CONNECT ANY TERMINAL ON ANY UNIT TO AC POWER LINES.
When you mount IE-2AD(U) unit in place of existing bell or chime, be sure to disconnect wires
from the present transformer.
* BE SURE TO DISCONNECT WIRES FROM BELL TRANSFORMER (or POWER SUPPLY)
BEFORE YOU OPEN THE IE-2AD(U) UNIT OR MAKE WIRING CONNECTIONS.
* Avoid running the connecting wires through doors, windows or between furniture, which may pinch
and disconnect the wires.
* IE-2AD(U) equipment must be installed in as dry and dust-free environment as possible.
Maintenance;
* Clean your IE-2AD(U) equipment with a soft cloth dampened with neutral household cleanser. Never
use thinner, lacquer or benzine, etc.
* Do not splash water on the door station by hose, etc.
NEVER
NEVER
SYSTEM COMPONENTS
IF;
1 llifllil
1 ■ ■■" ■ Ih' ^ |; p. \ 1
IF-DA lE-DC
(E-FY
IE-2AD(U)
1
l!ll!il|
lE-NC lE-JA
IER-2
« 1
ft"
13:
BF
liK
IEH-1CD
IE-DL3
EL-9S
3
Room stations;
IE-2AD(U) : Room master station. Wall-mount.
lEH-lCD : Room sub station. Wall-mount (max. 2 per system).
Door stations (max. 2 per system).
IF-DA : with brown plastic cover (surface-mount).
lE-DC : - do - (surface-mount).
lE-NC : - do - (semi-flush mount).
lE-JA : with stainless steel cover (flush-mount).
lE-FY : with aluminum cover (flush-mount).
lE-DLl : 1-call, with brown anodized aluminum cover (surface-mount).
IE-DL2 : -do-, 2-call.
IE-DL3 : -do-, 3-call (each with illumination lamp).
Options;
IER-2 : Call extension speaker, with volume control.
EL-9S ; Door release. AC 12V, 0.35A. Requires a separate bell transformer.
Notes; Your IE-2AD (U) can not work with IB/IC/ID series door stations. As to call extension, ICR-1 can be included in
IE-2AD(U) system.
INSTALLATION
(1) Actual terminal location;
m
[n
[DTI
[EH
IE-2AD1U)
BACK VIEW
m -
m -
E -
m -
ffl , Q-
For electric door release.
Connect to door station # 1 (non-polarized).
Connect to door station #2 (non-polarized).
For transmitting.
For receiving.
For receiving call signal.
For common line.
For power supply.
-
2