Wiring example, Specifications, Aiphone – Aiphone LA-B User Manual
Page 2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(2) Semi-flush mounting to an existing wall;
1. To install LA-B/BN unit to an existing wall, cut and open a hole
of H: 125 mm (4-15/16") x W; 85 mm (3-3/8").
2. Remove a panel on front case.
3. Mount LA-B/BN unit to wall with two screws (supplied) or
board fastener, etc.
4. Reattach the panel.
WIRING EXAMPLE
LAF-7B
it®
.LAF-7B
LAF-7B
ti®
LAF-7B
F®
NOTES;
_
(1) Each sub station (No. ®
, (1)
St @)
can
call
LAF-7B
masters
No.
®
8i
@
simultaneously.
And
each
sub
(No. (?), ® & d)) can call LAF-7B
masters No.CD & 0 simultaneously.
SUB
(LA-B/BN)
SUB STATIONS (LA-B/LA-BN)
#® it® #®
(2)
Sub No. (7) calls a master No. ®
only.
(3)
Terminals | P, | IP
2
I jPgj may remain
unconnected,
when
All
Call
is
not
required.
LAF-7B
CONNECTOR
WIRE
COLOR CODES
LA-B/LA-BN
CONNECTOR WIRE
COLOR CODES
9
1
Brown
P
2
Red
1
N
3
Orange
4
Yellow
7
W
1
5
Green
6
Blue
R
7
Purple
E
-
-
—
11
C
Brown
P
E
Orange
1
N
Y
Yellow
Pi
Green
10
W
!
Pt
Blue
Ps
Purple
R
R
Gray
E
L
White
-1-
Red
—
Black
? 3
P W
I I
N R
E
S
-
Black
E
Blue
1
Brown
3
SPECIFICATIONS
*Power source:
DC 12V. Supplied from LAF-B master.
* Communication: Handsfree alternate communication controlled by master.
*Callrng:
Electronic tone or Voice direct when called by master.
*Wiring:
3 wires from a connected master ( | 1 |, [E],[3)-
*Wiring distance: Between two farthest master and sub stations;
AWG
24 AWG
22 AWG
20 AWG
Distance
400'
650'
1,000'
Diameter
0.5 mm
0.65 mm
0.8 mm
Distance
120 m
200 m
300 m
* Dimensions:
Recessed:
* Weight:
H : 165 mm x W : 155 mm x D : 15 mm
(H : 6-1/2"
x W : 6-1/8'
H :117 mm x W : 76 mm
x D :31mm (H : 4-5/8"
x W : 3"
Approximately 220 g (0.49 lbs.).
D : 9/16")
D : 1-1/4")
WARRANTY
Aiphone warrants its products to be free from defects of material and workmanship under normal use and service for a period of one
year after delivery to the ultimate user and will repair free of charge or replace at no charge, should it become defective upon which
examination shall disclose to be defective and under warranty. Aiphone reserves unto itself the sole right to make the final decision
whether there is a defect in materials and/or workmanship; and whether or not the product is within the warranty.
This warranty shall not apply to any Aiphone product which has been subject to misuse, neglect, accident, or to use in violation of
instructions furnished, nor extended to units which have been repaired or altered outside of the factory.
This warranty does not cover batteries or damage caused by batteries used in connection with the product.
This warranty covers bench repairs only, and any repairs must be made at the shop or place designated in writing by Aiphone. Aiphone
will not be responsible for any costs incurred involving on site service calls.
Aiphone Co., Ltd., Nagoya, Japan
Aiphone Corporation, Bellevue, Washington
LA-B-I (E)0489C
INTERCOM SYSTEMS
AIPHONE
HOME, BUSINESS, INDUSTRY
Printed in Japan (E)