Audiovox MVX-470 - Manual (Page 15)

Terminating a Call
Press and the IN USE! indicator will go out.
To Receive Calls
1, When the telephone rings, press to answer
the call. The ¡IN USE indicator will light.
Silent Incoming Calls
If Silent Alert feature is set, a single beep and a
flashing “CALL” message on the display will alert you
of an incoming call.
Once you have switched to silent alert, the phone stays
in that mode until you deactivate it.
1. Press C^, then (|^. The “S-ALT ON" will appear
C _ 0 * L
3 <<(.C on
in the display.
2. When you receive a call, a single beep and a
flashing “CALL” message on the_display will alert
you.
3. Press to answer the call
“CALL” on the readout will go out.
This mode is deactivated by pressing @, then
“S-ALT OFF” will be displayed for 5 seconds.
5 -R L b o ff
5. If the Silent Incoming Calls is activated when the
unit is powered up “S-ALT ON” will appear on the
readout for 5 seconds.
Any Digit Key Answering
This feature permits you to answer on incoming call by
pressing any of the digit keys on the key pad.
Automatic Answering
With this feature, the incoming call will be automatically
connected for operation after two alert tones, and the
IN indicator will light on the readout.
Then the unit is ready for conversation.
1. To activate this mode, press TO and then key
“A-ANS ON” will appear on me readout__________
on
2. This mode is deactivated when @ and then key
(© are pressed again.
“A-ANS OFF” will be disniaved for 5 seconds.
G- P,nS y F F
3. This feature will not function if the unit is in the Lock
or Silent Incoming Call Mode.
If the Automatic Answering is activated when the unit
is powered up, “A-ANS ON” will appear on the
readout for 5 seconds.
Anti Fraud Security Feature
Your new Audiovox Cellular telephone has been
engineered with the latest technology to help protect from
the fraudulent use of your cellular telephone number.
Cellular fraud most often occurs by cellular thieves using
electronic devices that can read your unique cellular
phone number and your phone's electronic serial number
(E.S.N.). This information can then be programmed into
another phone for fraudulent use.
Certain cellular systems provide for an ANTI-FRAUD
security feature to help protect the unauthorized use of
your cellular telephone number. This feature utilizes a
special personal identification number (PIN).
Should your cellular carrier offer this enhanced service,
your new phone must be programmed with a PIN chosen
by you. For your protection, you cannot make any outgo­
ing calls until you have established your PIN. To establish
your PIN, please contact your cellular service provider for
specific instructions.
To place a call using PIN security feature
1. Enter the number you are calling by either dialing
the number or recalling the number from a specific
memory location.
2. Press the Csi^ key as your call is being processed
the word “SEND PIN” will appear in the display.
SEnd P
key again, your call will then be
28
Press the
placed.
To program your PIN
1. Enter your three digit security code
2. Press the @ key, then (@) (|§
29