Audiovox MVX-470 - Manual (Page 13)

Volume Control
The audio level o1 the earpiece and the alert tone can
be adjusted by the Volume Control Key or
A : To increase the sound level
V : To decrease the sound level.
• Earpiece volume;
1. Keep pressing or Q until you get the desired
sound level.
2. Sound level “H-S VOL X” (X=1~5) will be dis­
played on the readout.
You can monitor the sound level with the sample
tone when you are not engaged in a phone conver­
sation.
Example: (X = 5)
• Alert Tone:
1. Press
2. Keep pressing (3) or Q until you get the desired
sound level.
3. Sound level “ALT VOL X” {X=1~5) will be dis­
played on the readout.
Example: (X = 5)
H
-C _• c
O' L
"i. C uOi.
MEMORY NAME TAG
This feature permits you to tag an identifying name (up
to 5 characters) to each phone number in the memory
address. The name will be displayed each time you
recall a number from memory address.
To Enter Names using Alpha (Letters)
1. Press “ALPHA” will appear on the readout
to indicate the Alpha Mode is active.
2. Press digit keys repeatedly uniti the character you
need appears. The following table shows which char­
acter is assigned with each digit key.
Key 1 press 2press 3press 4press Spress
1 - t
2 ABC
b
r
1. E
3 DEF d
E
F 3
4 GHI
9
h 4 9
5 JKL
1
U h
t
L.
5
6 MNO
nn
»
4 n o S
7 PQRS
P
9 r S
n
4
8 TUV
t
f 4
u
u 8
9 WXYZ
uu H
9 i
9
0 OPER n
u
(Blank)
# (Blank)
3. When the letter or number you want is shown on the
display, press @ to locate the second letter or
number.
4. Go back to step 2, and repeat the same procedures
until the complete character name is displayed.
5. When an entry error is made, press @) momentarily
to erase the last character. If you press @ more
than a second, all characters on the readout will be
erased.
6. To exit Alpha Mode, press @ ®.
24
25