Display own telephone number, Repertory memory scroll, Automatic storing into a vacant memory address – Audiovox MVX-470 User Manual
Page 12: Enter (jr, Press, To lock the unit, To unlock the unit
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Display Own Telephone Number
1. Press
Your system ID number will be displayed while the key
is held down and your own phone number will be
displayed when you stop pressing key (©.
Repertory Memory Scroll
(Memory Address)
This feature is useful in finding a certain phone number by
scrolling the repertory memory.
1. Press ^ then or Q.
A:
Scroll upward (with roll back to 01)
V: Scroll downward (with roll up to 30)
Memory address and the last 7 digits of the stored
number will be displayed on the readout as follows.
Example:
Jiu
Address No. Tel. No.
Note: In this scroll feature, any vacant memory addr-
ess(es) will be skipped.
Automatic Storing into a Vacant
Memory Address
This feature allows automatic storing into a vacant reper
tory memory address.
This can prevent the possible over writing of a previous
ly stored number.
1. Enter the phone number.
2. Press (^ then (f_).
Example: To store the phone number 123^- -
7890 into a vacant memory address(03}
1. Enter (jr.
2. Press
3. Memory address
number and the last 7
digits of the Stored
phone number will be
displayed.
n ^ _ L«c c noon
LIJ <_rU lOJU
Tull Bull
Note: The number will be stored in the smallest avail
able vacant memory address number. However, if
no vacant address is available, the phone number
will not be stored.
To Lock the Unit
1. Press then (£)'.
2. The^ indicator turns on.
Note: The unit will remain locked until unlocked, even if
the power is turned off.
To Unlock the Unit
1. Enter the three-digit unlock code.
2. The LOCi^ indicator will go out.
Note: The unlock code is registered in the programadle
option and advised by your dealer when you pur
chase the phone.
22
23