Clarion DRX9575Rz - Manual (Page 8)

12
DRX9575Rz
Adjusting the bass
1. Press A-M button % and select “SOUND”.
2. Press the right or left side of SEARCH button
2 to select “BASS”.
3. Turning the Rotary knob 3 clockwise empha-
sizes the bass; turning it counterclockwise
attenuates the bass.
∗
The factory default setting is “0”. (Adjustment
range: –6 to +6)
∗
The bass cannot be adjusted if the tone by-
pass setting is “YES” (ON).
4. When the adjustment is complete, press A-M
button % several times until the function mode
is reached.
Adjusting the treble
1. Press A-M button % and select “SOUND”.
2. Press the right or left side of SEARCH button
2 to select “TREBLE”.
3. Turning the Rotary knob 3 clockwise empha-
sizes the treble; turning it counterclockwise
attenuates the treble.
∗
The factory default setting is “0”. (Adjustment
range: –6 to +6)
∗
The treble cannot be adjusted if the tone by-
pass setting is “YES” (ON).
4. When the adjustment is complete, press A-M
button % several times until the function mode
is reached.
Adjusting the balance
1. Press A-M button % and select “POSITION”.
2. Press the right or left side of SEARCH button
2 to select “L/R” (LEFT/RIGHT).
3. Turning the Rotary knob 3 clockwise empha-
sizes the sound from the right speaker; turn-
ing it counterclockwise emphasizes the sound
from the left speaker.
∗
The factory default setting is “0”. (Adjustment
range: LEFT13 to RIGHT13)
4. When the adjustment is complete, press A-M
button % several times until the function mode
is reached.
Adjusting the fader
1. Press A-M button % and select “POSITION”.
2. Press the right or left side of SEARCH button
2 to select “F/R” (FRONT/REAR).
Basic Operations
3. Turning the Rotary knob 3 clockwise empha-
sizes the sound from the front speakers; turn-
ing it counterclockwise emphasizes the sound
from the rear speakers.
∗
The factory default setting is “0”. (Adjustment
range: FRONT12 to REAR12)
4. When the adjustment is complete, press A-M
button % several times until the function mode
is reached.
Adjusting the Z-enhancer
1. Press Z-EHCR button 8 and select the Z-
enhancer mode (1-3) to adjust.
2. Press A-M button % and select “Z-ENHANCER”.
3. Turning the Rotary knob 3 clockwise adjusts
in the + direction; turning it counterclockwise
adjusts in the – direction.
∗
When Z-Enhancer 1 is selected, you can adjust
the bass in the range of
±
2.
∗
When Z-Enhancer 2 is selected, you can adjust
the treble in the range of
±
2.
∗
When Z-Enhancer 3 is selected, you can adjust
the bass and treble in the range of
±
2.
4. When the adjustment is complete, press A-M
button % several times until the function mode
is reached.
Note:
• If a Z-enhancer (1-3) is ON, tone bypass cannot
be set.
Turning on/off the loudness
The loudness effect emphasizes the bass and
treble to create a natural sound tone. When you
are listening to music at a low volume, it is rec-
ommended to use the loudness effect.
1. Press and hold LOUD button % for 1 second
or longer to turn on the loudness effect. When
the loudness effect is turned on, “LD” lights in
the display.
2. Press and hold LOUD button % for 1 second
or longer to turn off the loudness effect. “LD”
goes off in the display.
Note:
• When using a sold separately digital sound processor
(DPH7500z), a feature called auto loudness is selected.
This function is different from the loudness effect. For
further details on the auto loudness feature, refer to the
subsection “Output adjustment of auto loudness,
subwoofer and playback band”.