Clarion DRX9575Rz - Manual (Page 14)

18
DRX9575Rz
CD Operations
Scan play
The scan play locates and plays the first 10 sec-
onds of each track on a disc automatically. This
function continues on the disc until it is canceled.
∗
The scan play is useful when you want to select a
desired track.
1. Press the number “1” of Direct buttons $ to
start scan play. “SCN” lights in the display.
2. To cancel the scan play, press the number
“1” of Direct buttons $ again. “SCN” goes off
from the display and the current track
continues to play.
Repeat play
The repeat play continuously plays the current
track. This function continues automatically until
it is canceled.
1. Press the number “2” of Direct buttons $ .
“RPT” lights in the display and the current
track is repeated.
2. To cancel the repeat play, press the number
“2” of Direct buttons $ again. “RPT” goes off
from the display and normal play resumes.
Random play
The random play selects and plays individual
tracks on a disc in no particular order. This
function continues automatically until it is
canceled.
1. Press the number “3” of Direct buttons $ .
“RDM” lights in the display, an individual track
is selected randomly and play begins.
2. To cancel the random play, press the number
“3” of Direct buttons $ again. “RDM” goes
off and normal play resumes.
Setting the clock
1. Press ADJ button & to switch to the
adjustment selection display.
2. Press the right or left side of SEARCH button
2 to select “CLOCK”.
3. Press ENT button ( .
4. Press the right or left side of SEARCH button
2 to select “AUTO/MANU”.
5. Tur n the Rotar y knob 3 clockwise or
counterclockwise to set “AUTO” or “MANU”.
AUTO:
Displays the time based on the data from the
RDS broadcast.
MANU:
Displays the time from the clock in this unit.
6. Press the right or left side of SEARCH button
2 to select the hour or the minute.
7. Tur n the Rotar y knob 3 clockwise or
counterclockwise to set the correct time.
∗
The clock is displayed in 12-hour format.
8. Press ENT button ( to store the time into
memory.
9. Press ADJ button & to return to the previous
mode.
Note:
• You cannot set the clock when it is displayed with
only the ignition on. If you drain or remove the car’s
battery or take out this unit, the clock is reset. While
setting the clock, if another button or operation is
selected, the clock set mode is canceled.
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for TV stations and CDs.
The numbers of titles that can be entered for each
mode are as follows.
1. Press FUNC button 5 to select the mode you
want to enter a title. (CD, CD changer or TV)
2. Select and play a CD or a CD in the CD
changer or tune in to a TV station for which
you want to enter the title.
Mode Number of titles
CD mode 50 titles
TV mode 15 titles
CD changer mode Number of titles
CDC655z connected 60 titles
CDC655Tz connected 100 titles
CDC1255z connected 50 titles
Other Handy Functions