Clarion DRX9575Rz - Manual (Page 19)

DRX9575Rz
23
MD Changer Operations
MD changer functions
When an optional MD changer is connected
through the CeNET cable, this unit controls all
MD changer functions. This unit can control a
total of 2 changers (MD and/or CD).
Press FUNC button 5 and select the MD
changer mode to start play. If 2 MD changers
are connected, press FUNC button
5 to select
the MD changer for play.
∗
If “NO DISC” appears in the display, load MDs into
the MD changer.
Pausing play
1. Press Play/pause button ( to pause play.
“PAUSE” appears in the display.
2. To resume play, press Play/pause button (
again.
Switching disc titles and track titles
This unit can display disc titles and track titles
already entered on MDs. Titles up to 128
characters long can be displayed by scrolling the
titles.
∗
Titles cannot be entered for MDs with this unit.
1. Press DISP button " to display the main
display. The disc title or track title is displayed.
2. Each time you press and hold DISP button
" for 1 second or longer, the display toggles
between the disc title and the track title.
● Scrolling titles
When a title is longer than 11 characters, you
can scroll through it with the following operation.
1. Display the MD title (disc or track).
2. Press TITLE button ) . The display scrolls
through the title.
Selecting an MD
Each of the Direct button $ corresponds to an
MD loaded into the MD changer.
1. Press S button # to display the disc display.
2. Press Direct button $ (1 to 6) and select the
desired MD.
∗
If an MD is not loaded in a slot of the MD
changer, pressing Direct button
$
corresponding to its disc number is invalid.
Selecting a track
● Track-up
1. Press the right side of SEARCH button 2 to
move ahead to the beginning of the next track.
2. Each time you press the right side of SEARCH
button 2 , the track advances ahead to the
beginning of the next track.
● Track-down
1. Press the left side of SEARCH button 2 to
move back to the beginning of the current
track.
2. Press the left side of SEARCH button 2 twice
to move to the beginning of the previous track.
Fast-forward/fast-backward
● Fast-forward
Press and hold the right side of SEARCH button
2 for 1 second or longer.
● Fast-backward
Press and hold the left side of SEARCH button
2 for 1 second or longer.
Top function
The top function plays from the first track (track
No. 1) of the disc.
1. Press S button # to display the disc display.
2. Press Direct button $ (1 to 6) with the same
number as the MD playing.
∗
If an MD is not loaded in a slot of the MD
changer, pressing Direct button
$
corresponding to its disc number is invalid.
Scan play
The scan play locates and plays the first 10
seconds of each track on a disc automatically.
This function continues on the disc until it is
canceled.
∗
The scan play is useful when you want to select a
desired track.
1. Press S button # to display the subdisplay.
2. When you press the number “1” of Direct
buttons $ , scan play starts. “SCN” lights in
the display.
3. To cancel scan play, press the number “1” of
Direct buttons $ again.“SCN” goes off from
the display and the current track continues to
play.