AEG 4159 - Manual (Page 30)

- Is there still special salt in the salt container? Without special salt, the water will
not be softened. At water hardnesses above 4 “d, lime deposits will form on
your dishes (see the section on "Filling with special dishwasher, salt").
- Have you set the water softener to the local water hardness? {see the section
on “Setting the water softening Si^em").
Cl The dishes do not dry and have no sparkle.
- Have you used a branded rinse aid?
-
Is there sufRcient rinse ad in the dispenser? (see the section on “Riling with
rinse aid").
□ Glasses and dishes have streaks, stripes, milky blotches, or blue-
coloured blooms.
- The rinse aid is being overdosed. Set a lower rinse aid dosage (see the section,
■ on “Setting the rinse aid quantity to be dosed“).
Cl Glasses and dishes.have dried-on water drops.
- The rinse aid is being underdosed. Set a higher rinse aid dosage (seethe section
on “Setting the rinse aid quantity to be dosed").
- The detSfgent may be the cause. Contact your detergent manufacturer's con­
sumer services manager.
□ Rusi marks can be seen inside your machine.
- The dishwasher interior is made of stainless steel. If rust is found inside your
dishwasher, this must be from another source (rust in water, from sauc^ans,
cutlery, etc.). Remove such marks with a commercially available stainless steel
cleaner.
- Have you dosed the detergent correctty? (see the section on “Filling with
detergent”).
- Is the lid of the salt container closed properly? (see the section on “Filling with
special dishwasher satT).
Have you set the water softener correctly? (see the section on “Setting the
water softening system”).
70