AEG 4159 - Manual (Page 14)

Before using your dishwasher for the first time
To ensure protection of the crockery baskets during transport, we have packed
them with damps. Please remove aii clamps before operating your dishwasher.
When your new dishwasher is correctly set up and installed, you must first make
it ready for use.
Before using your dishw/asher for the first time, proceed as follows:
- set the water softener;
- fill the special salt ccntainer with special salt;
- fill the rinse aid dispenser with rinse aid.
The following sections give you more detailed information on the individual points.
Setting №e water softening system
Soft (low-lime) water is necessary for machine washing to avoid lime deposits on
crockery and in your dishwasher. Tap water with a hardness above 4 “d^ (German
degree) must therefore be softened for machine washing.
Forthis purpose, your dishwasher is fitted with a water softener. The water softener
is treated (regenerated) automatically and at regular intervals with salt solution.
The salt consumption needed for regeneration thus depends on the local water
hardness. Your competent water company will provide you with information about
water hardness in your locality.
To ensure optimum regeneration of the water softener:
- the water softening system must be set to the local water hardness;
- the dishwasher salt, container must always be filled with special salt.
Ì3
S
d]
54
CЩ
5