Installation, Wall mounting installation – Aiphone LAF-3A User Manual
Page 2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EQUIPMENT AVAILABLE EOR USE WITH YOUR LAF-3A/A LOUDSPEAKER INTERCOM SYSTEM
✓
LAF-3A (Type A):
3 call master station.
LAF-5: 5 call master station.
LAF-10:
10 call master station.
LAF-IOS: 10-call master.
Includes all call and door release
buttons.
LA-A: Standard sub station.
LA-AN: Privacy type sub station.
LA-A3: 3 call sub station.
Places to and receives calls from up to thre<
y
master stations.
LA-AN3: 3 call privacy type sub station.
LA-D: Weather resistant sub station.
LA-DA: Flush-mount door station.
PG-3: 3-watt paging amplifier.
LT-1:
20 ohm to 8 ohm matching trans
former. Connects LAF master station to
a 8 ohm paging horn.
PS-12A: Power supply (not available in
North America).
PS-12C: CSA & LIL Listed power supply
(available only in N. America).
NOTES: *For specification/installation information for Model PG-3, please refer to the Instructions packed with each PG-3
unit.
INSTALLATION
Do not attempt to install your intercom system until you have read and thoroughly understood the installation pro
cedure. Aiplione’s warranty is void if system is installed in a manner other than described in this manual.
,
(T)
Bottom cover. Do not open except for repair purpose.
(2) Volume control for call tone. Adjust to desired level using
screw driver.
Terminal block;
1 , 2 , 3
C
E
R
+
,
-
WALL MOUNTING INSTALLATION
1) Attach mounting bracket to wall or box with supplied
screws.
2) Mount station upon the mounting bracket.
for connecting relative stations
for receiving a call
for common communication
for occupied lamp
for power supply