Audiovox CTX-4200 - Manual (Page 17)

To Exit Voice Memory Mode:
Press [FUNCI , then fCL^ .
Ail indicators will light momentarily, and a tone
will be heard.
2. Answering Mode
When the phone is in Answering Mode, the phone will
answer incoming calls with your recorded message in
your absence, even if you turn off the ignition.
To Set Answerning Mode:
1) Press 1 FUNCI , then key 0 .
will appear on the readout.
2) Turn off the ignition switch, but leave the phone
power switch ON. If necessary, lock the unit.
3) The unit will be ready to answer incoming calls
with the recorded message.
To Deactivate the Answering Mode:
This mode is automatically deactivated in the follow­
ing cases:
1) When the ignition switch is turned back to “on” or
“accessory” position.
2) When the safety timer is expired. (Refer to
“Safety Timer”,)
3) When I FUNCI , then key 0 are pressed again.
4) When one of the following features is activated.
■ Horn Alert,
• Calls in Absence Indicator
• Data Transmission (Automatic Mode)
HORN ALERT
(NAM OPTION)
This feature indicates the incoming call by sounding
the horn or by flashing the lights.
1. Press |FUN(^, then key . ¡ Horn | will appear on
the readout. However, the mode is not available
unless the ignition switch is turned off.
2. Turn off the ignition switch, but leave the car
telephone power switch ON. If necessary, lock the
unit.
3. When a call is received, the unit will either sound
the horn or flash the lights five times, depending
on how the horn alert wire has been connected to
the car.
4. This mode is deactivated in the following cases ;
1) When |FUNC] and then key are pressed
again,
2) Set the Calls in Absence Indicator mode.
3) Set the 15-second Personal Answering Mes­
sage mode.
Noted): Deactivate the mode if not necessary,
because this mode remains activated
even if the power source is turned off.
Note(2): The powder source is auotmatically tur­
ned off to prevent the discharge of car
battery when the safety timer expires
(refer of "Safety Timer”).
CALLS IN ABSENCE
INDICATOR
This feature indicates the number of incoming calls
while you are out of your car.
1. Press IFUNC |, then key . [~~Caín will appear on
the readout. However, the mode is not available
unless the ignition switch is turned off.
2. Turn off the ignition switch, but leave the car
telephone power switch ON. If necessary, lock the
unit.
3. When calls are received, the unit will indicates
them by flashing I CALL | and I X xl (X X is the
number of calls) alternately on the readout.
4. This mode is deactivated in the following cases :
1) When I FUNC I and then key are pressed
again.
2) Set the Horn Alert mode.
3) Set the Automatic mode of Data Transmis­
sion.
4) Set the 15-second Personal Answering Mes­
sage mode.
5. The I CALL | and | X X| will remain flashing
until any key is pressed or the handset is lifted.
Noted): Deactivate the mode if not necessary,
because this mode remains activated
even if the power source is turned off.
Note(2): The power source is automatically tur­
ned off to prevent the discharge of car
battery when the safety timer expires
(refer to "Safety Timer”).
SAFETY TIMER
(NAM OPTION)
Your timer is set for 8 hours. You can change it from
1 hour up to 31 hours for 15-second Personal Answer­
ing Message, Horn Alert, Calls in Absence Indicator
and Automatic Mode of Data Transmission features.
32 33