Audiovox CTX-4200 - Manual (Page 12)

If only one short beep is heard, say the “NAME”
again.
If the repeated “NAME” is not correct, press any
digit key to stop the call. Press the digit key for
about one second, the tone will shift, and you can
enter the “NAME” again.
Noted): You can set the Voice Activated Mode only
when your unit is in stand-by condition.
Note(2): The Voice Activated Mode is deactivated
when your unit makes a call, when you press
[ENDI ,or one minute after setting the Voice
Activated Mode.
ONE TOUCH DIALING
This feature permits you to place a call by a single
key stroke.
To Store a Number into One Touch
Memory
1. Press |CLR|, then enter a phone number.
2. Press |STO|, then one of the two One Touch Keys.
Stored numbers can be reviewed by pressing |WCLj
then the One Touch Key you want to review.
To Place a Call to a Number in
One Touch Memory
Press the One Touch Key for approx. O.Ssec..
The last 10 digits of the number will be displayed on
the readout, and the |TN USE j indicator will light as
a call is placed.
CALL RESTRICTIONS
(NAM OPTION)
This feature permits you to impose various kinds of
restrictions on Outgoing Calls.
To Set Call Restricted Mode
Enter the three-digit security code, then press IFUNCI
, key Ul then . The following key operation is
needed to activate one of the restricted modes;
[T| : Only phone numbers having 11 digits or less are
accepted. Operator assisted dialing is prohibited.
[2]: Only phone numbers having 7 digits or less are
accepted. Operator assisted dialing is prohibited.
: Operator assisted dialing {0 Origination) is pro­
hibited.
[4] • No phone calls can be placed except for re­
pertory dialing from memory address 01 to 09.
However, emergency call with “911” are availa­
ble.
Only One Touch dialing is permitted. However,
emergency call with “911” are available.
No restriction.
To Exit Call Restriction Programming
Mode
Press IFUNCI , then ICLR] .
Noted): When in restricted mode 4 and 5, number
storage into the memory will not be permit­
ted.
Note(2): In the restricted mode, a short beep tone will
be heard to inform you of the improper
operation, and the word [Restricted] will be
shown on the readout.
HANDS-FREE OPERATION
(NAM OPTION)
This feature permits you to engage in a conversation
without lifting the handset.
1. After receiving a call (press
the
SND| to answer),
the hands-free conduct the conversation via
microphone with the handset on the cradle. To
converse more naturally;
a. Speak in a normal tone.
b. Turn off the radio or stereo and close the car
windows.
2. To place a call, enter the phone number, then press
jSNDl. The microphone will be turned on, ready
for conversation when your party answers.
3. After a call is completed. Press I END) to terminate
the call.
Note: If you hear feedback on a bad RF Channel,
adjust the hands-free loop attenuation as fol­
lows.
1) Press IFUNCI. key [7[ then [2]. Hands-free
loop attenuation will be increased by 6 dB,
2) To return to the normal condition, press
IFUNCI , key [7] then [l] .
22
23