American Dryer Corp. AD-400 - Manual (Page 25)

SECTION V
SF.R VICE/PARTS INFORM ATTON
A. SERVICE
1. Service must be performed by a qualified trained technician or service agency, or gas supplier. If
service is required, contact the distributor from whom the ADC equipment was purchased. If the
distributor cannot be contacted or is unknown, contact the ADC service department for a distributor in
your area.
I
NOTE: When contacting the ADC service department, be sure to give them the correct model
number and serial number so that your inquiry is handled in an expeditious manner.
B. PARTS
'"J
1. Replacement parts should be purchased from the distributor from whom the ADC equipment was
purchased. If the distributor cannot be contacted or is unknown, contact the ADC parts department
for a distributor in your area. Parts may also be purchased directly from the factory by calling the
ADC parts department at (508) 678-9010.
NOTE: When ordering replacement parts from the ADC dealer or ADC factory, be sure to give
them the correct model number and serial number so that your parts order can be processed in
an expeditious manner.
23