Functions – Audiovox MVX-850 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FUNCTIONS
Retractable
Whip Antenna
(1) Receiving
Signal
Strength
Indicator
(2) Povv'er-
Indicator
(3) Battery-
Level
Indicator
(9) Send Key
(10) One Touch-
Emergency
Key
(11) Digit"
Keys
(12) Po\ver
On/Off
Key
(13) Function—'
Key
-Earpiece
(4) Incoming
Call
Indicator
p(5) IN USE
-(6) NO SVC
-(7) ROAM
--(8) Alpha
Numeric
Display
-(14) End Key
-(15) RecalP
Store Key
-(16) Voice Mail
DiaPAlpha
Key
L(17) Clear
Key
-(18) Volume
Keys
Microphone
(1) RECEIVING SIGNAL STRENGTH INDICATOR:
The number of shaded blocks indicates the Re
ceiving Signal Strength.
(2) ¡T] is used as a POWER ON indicator which
lights when the unit is turned on.
(3)B
is used as a battery level indicator.
(4) INCOMING CALL INDICATOR:
Flashing LED alerts you of an incoming call.
(5)
I
IN USEI indicator lights when a call is in progress.
(6) NO SVC (no service) indicator lights when the
unit is in a non-coverage area,
(7) tROAMi indicator lights when the unit is out of
the home area.
(8) 30-CHARACTER FUNCTIONAL ALPHANU
MERIC DISPLAY:
First
10
characters
indicate
a
battery
level,
current function and status conditions. The re
maining 20 characters show the name and the
last 10 digits of the dialed number.
(9)
(send key) is used for placing or receiving a
call.
(10) C
l
) One Touch Emergency key.
(11) DIGIT KEYS to enter a phone number.
(12)
(power on/off key) is used to turn on/off the
unit.
(13) L9 (function key) shifts the digit keys to the
functional keys.
(14)
(e^ (end key) terminates a call.
(15)
(recalPstore key)
• To recall phone numbers from repertory
memory, press
• To store phone numbers in repertory memory,
press is ’Ll).
(16)
'1^ (voice maiPalpha key)
“ To access the linked speed dialing capability,
press
• To enter alphabetical characters, press '0 0.
(17) -0 (clear key) clears the digit(s) from the dis
play.
(18) 0 or 0 (volume key)
• To control earpiece audio level, press
0
or
0.
• To control alert tone level, press 0 -▼) or
0.
12
13