Audiovox MVX-850 - Manual (Page 12)

ALPHA SEARCH
This feature permits you to find a phone number
stored in the memory by the first character of the
Alpha Name Tag. This search can retrieve all
entries beginning with the assigned initial charac­
ter.
1. Press to set the Alpha Mode.
2. Enter the initial character, by which you need
to- search the phone number.
3. Press ® 0. The display will show the first
entry whose Name Tag begins with the as­
signed initial character, and which is stored in
the
lowest memory address. Display shows
Name Tag, Memory Address and Phone
Number.
4. Press 0 or 0.
0 : Scroll memory address upward.
■0 : Scroll memory address downward.
Example:
Operation
©
Display
0 0 A p:h a
0 Q0 0^
X « C K
i; 2 [4 b m 0
BO U 0*&
J:0 M N
00 B 7 bfSi 0 2 it
B 0 0 u l; 5
X A M£ S'*: 1':
2 t DO 0 8 7: a E n
B
4
m
0f9
0-
I
-- t
0 B 00 0 V lM8
J.
“1- 817)6
4' 8 2
PLACING TELEPHONE
CALLS
To Place a Call
1. Enter the phone number. The last 20 digits of
the dialed number are displayed on the readout.
Note: After 60sec., display will return to the
10-digit display mode.
2
.
3.
If a dialing error is made, press 0, then enter
the phone number again. Pressing 0 momen­
tarily (less than approx. 0.5 sec.) clears only
the last digit.
Press The IIN USEl indicator will light.
When the called party answers, proceed with
your conversation.
If the Call Fails to Go Through
1 .
2 .
If you hear the “reorder” signal, press C0),
then if there were no dialing errors, press (§0)
for redial. (Redialing with digit keys is not
necessary.)
If the “intercept” signal is heard, press
then redial the correct number.
Automatic Redial (NAM Option)
If the feature of Automatic Redial is selected, your
unit will automatically make seven attempts to
reach the cell site when the first try is not success­
ful. The IIN USEi indicator will stay on, but the
speaker will be muted for thirty seconds. This is
done so that you do not hear the reorder signals
out of the speaker. If you need to terminate the
automatic redial, press 02^.
Terminating a Call
Press and the liN USEI indicator will go out.
To Receive Calls
When the telephone receives an incoming call,
press 00 to answer the call. The IIN USEI indica­
tor will light.
22 23