To mute a phone conversation, Voice mail dialing, To store numbers – Audiovox MVX-850 User Manual
Page 15: To place a call, Call restriction (nam option), To set call restricted mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

3. Enter the three-digit security code.
The current mode will flash.
4.
Press (O, and One Touch Emergency Call is
activated.
Press (^, and One Touch Emergency Call is
deactivated.
This feature will not function if the unit is in
the Keypad Lock.
5.
6
.
To Mute a Phone Conversation
1. Press 0
LMutel will appear on the
readout. The transmit audio will be muted and
the receive audio will be heard from the re
ceiver. The mute (or hold) feature will permit
you to converse privately with a passenger
during a call.
2. To return to normal conversation:
Press 0 (|3 again,
3. Mute is reset when the call is terminated.
VOICE MAIL DIALING
This feature permits you to access, through tel
ephone lines, a computer system and send DTMF
number codes in sequence. Up to five numbers can
be stored and are sequentially accessed with one
touch of the “Voice Mail Access” key. The first
number is sent in digital form to the cell site, then
up to four other numbers are sent with DTMF
signaling.
To Store Numbers
Store the numbers to be linked into the special
memory address 91 through 95. Each number
should be within 32 digits.
To Place a Call
Press 0 “Voice Mail Access” key for approx. O.Ssec.
The first number in memory address 91 will ap
pear on the readout and will be sent digitally to
the cell site. After you hear the signal from the
Operating Office, press “Voice Mail Access” key
again. The second number is memory address 92
will appear on the readout and is sent with DTMF
tones. You will monitor the tones through the
loudspeaker. The third through fifth number in
memory address 93 through 95 can be accessed
sequentially in the same manner as above.
CALL RESTRICTION
(NAM OPTION)
This feature permits you to impose various kinds
of restrictions on Outgoing Calls.
To Set Call Restricted Mode
1. Press 0 (9^ (4^.
The
[Restrict
[ will appear on the readout.
2. Enter the three-digit security code.
The current mode will flash.
You can change the current mode by pressing
'lO or C]).
■-$3 ■- Scroll upward.
'^0 ; Scroll downward.
11 digits : Only phone numbers having 11 dig
its or less are accepted. Operator
assisted dialing is prohibited.
7 digits : Only phone numbers having 7 dig
its or less are accepted. Operator
assisted dialing is prohibited.
Operator : Operator assisted dialing (0 Origi
nation) is prohibited.
Recall 1-9: No phone calls can be placed ex
cept
for
repertory
dialing
from
memory address 01 to 09. How
ever, programmable emergency call
will be available.
OFF : No restriction.
3. Press 0.
Note: (1) When in the “Recall 1-9” mode, number
storage into the memory will not be
permitted.
(2) In the restriction mode, a short beep
tone will be heard to inform you of the
improper
operation,
and
the
word
IRfeSiricted] will be shown on the readout.
28
29