Audiovox MVX-850 - Manual (Page 19)

MULTIPLE CITY
REGISTRATION
RADIO FREQUENCY (RF)
CHANNEL INDICATOR
Some cellular users find it beneficial to register
their phone in multiple cities, rather than rely on
“roam”. The multiple city registration feature per­
mits you to reprogram from the telephone unit, the
different phone numbers for the cities in which
you are registered. Each programmed phone
number will be designated as your home system.
Press and enter the new system ID
number (5 digits) followed by the corresponding
phone number (10 digits). Please include your area
code. You must register your unit with the carrier
in order to get both the system ID number and
your phone number.
Press Your new phone number will be dis­
played on the readout.
Note; (1) System ID number and phone number
can not be programmed during a call.
(2) Calls are placed or received using only
the programmed phone number, in use
at the time of call.
LAST RESCAN SID
INDICATOR
This feature permits you to recall the last system
identification accessed by your phone.
Press
The last rescan SID is displayed on the readout for
lOsec. The display format is as follows;
■ f :
R a*Si Qn JÌ s V D
i, 0 ÌÓp 2 0
If the jNCiSYC^ indicator is on, the display will
show as follows:
If necessary, you can see the RF channel status in
which your unit is operating.
1. Press 0
The RF channel number, RSSI, SAT color code,
and transmitting power level will be displayed
on the readout. The display format is as fol­
lows: F 8 4
R F c 1:2 3
R 1 8 7 S- 0 P 2
C123....
R187....
SO....
P2....
RF channel number
RSSI value
SAT color code
Transmitting power level
2 . The display will remain on the readout until
you manually reset it by pressing key
AUTOMATIC CALLS IN
ABSENCE INDICATOR
This feature indicates the number of unanswered
incoming calls. If incoming calls are unanswered,
the Incoming Call Indicator lights intermittently
and the unit will indicate the following.
ESidB
XX is the number of calls (01 to 99) missed.
Depressing any key (other than the Power Key)
will clear the number of calls indicated in Display
and the Incoming Call Indicator will no longer
light intermittently. However, the number of calls
will remain if the unit is turned off.
F
'§ h!:::
t.
D
36
37