Any digit key answering, Alert tone selection, Silent alert – Audiovox MVX-850 User Manual
Page 13: Automatic answering, Anti-fraud security feature
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Any Digit Key Answering
This feature permits you to answer an incoming
call by pressing any of the digit keys on the key
pad.
Alert Tone Selection
This feature permits you to select a most suitable
alert tone among four options.
1. Press 0
(2^ to enter into Alert Tone
Selection Mode.
The cuirent Alert Tone Pattern will appear.
2. Press CiO or to scroll four options of Alert
Tones, and press 5^ to determine the Tone.
3. Select “OFF” to Mute Alert Tone, and the unit
enters into Silent Alert. If Silent Alert is acti
vated when the unit is powered up,
will
appear on the readout for 10 seconds.
Silent Alert
If
an incoming call is received in this mode,
iCAtLi
will flash on the display and the Incoming Call
Indicator (LED) will flash without an obtrusive
audible ring signal.
Single “beep” at the beginning of call will allow the
user to know a phone call is being received.
Automatic Answering
With this feature, the incoming call will be auto
matically connected for operation after two alert
tones, and the llNDSEl indicator will light on the
readout.
Then the unit is ready for conversation.
1. Press
0 (3 CD.
The
lAutaAnswerl
will appear on the readout.
The current mode will flash.
2. Press (D, and Automatic Answering is acti
vated.
If the Automatic Answering is activated when
the unit is powered up, A Ansi will appear on
the readout for 10 seconds.
3. Press ^^53, and Automatic Answering is deacti
vated.
4. This feature will not function if the unit is in
the Lock, Keypad Lock and Silent Alert.
Anti-fraud Security Feature
Your new Audiovox Cellular telephone has been
engineered with the latest technology to help pro
tect from the fraudulent use of your cellular tel
ephone number.
Cellular fraud most often occurs by cellular thieves
using electronic devices that can read your unique
cellular phone number and your phone's electronic
serial number (E.S.N.). This information can then
be programmed into another phone for fraudulent
use.
Certain cellular systems provide for an ANTI
FRAUD security feature to help protect the unau
thorized use of your cellular telephone number.
This feature utilizes a special personal identifica
tion number (PIN).
Should your cellular carrier offer this enhanced
service, your new phone may be programmed with
a PIN chosen by you. For your protection, you
cannot make any outgoing calls until you have
established your PIN. To establish your PIN, please
contact your cellular service provider for specific
instructions.
To place a call using the PIN security feature
1. Enter the number you are calling by either
dialing the number or recalling the number
from a specific memory location.
2. Press the
key as your call is being
processed the word [gEND PIN] will appear in
the display.
3.
Press the key again, your call will then
be placed.
To turn the ANTI-FRAUD feature On/Off.
1. Press 0 3 3.
The IPINI will appear on the readout.
The current mode will flash.
2.
Press
D,
and PIN mode
is
activated.
3. Press and PIN mode is deactivated.
To change the PIN.
1, Press '0
'"D-
The I
pin
! will appear on the readout.
2, Press and PIN .number is changed.
3,
Enter
the
three-digit security
code.
Old
number will appear on the readout.
4, Enter the new PIN number.
5, Press 3-
24
25