Before operation, Audio adjustments, To turn the unit on – Aiwa CX-NA31 User Manual
Page 8: Demo (demonstration) mode, Flash window, To turn the unit off, Volume, Super t-bass system, Using the headphones, Sound adjustment during recording
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

i
I
BEFORE OPERATION
AUDIO ADJUSTMENTS
POWER
DEMO
■CD
VOLUME
PHONES
T-BASS
T-BASS
SHIFT
VOLUME
To turn the unit on
Press one of thé function buttons (TAPE, TUNER, VIDEO/AUX,
CD).
Playback of the inserted disc or tape begins, or the previously
tuned station is received (Direct Play Function).
The POWER button is also available.
When the unit is turned on, the disc compartment rnay open and
close to reset the unit.
DEMO (Demonstration) mode
When the AC cord is connected, the display window
demonstrates the functions of the unit. When the power is turned
on, the DEMO display is overridden by the operation display.
When the power is turned off, the DEMO mode is restored.
To cancel DEMO mode
Press the DEMO button. The clock display appears. (To set
the current time, see “SETTING THE CLOCK” on page 19.)
To re-activate the DEMO mode, press the DEMO button again.
Flash window
The window on the top of the’unit lights up or flashes while the
unit is being powered on.
To turn off the light of the top window, press the ■ button while
pressing the CD button. To turn back on, repeat the above.
To turn the unit off
Press the POWER button.
VOLUME
Turn the VOLUME control on the main unit, or press the
VOLUME buttons on the remote control.
The volume level is displayed as a numberfrom 0 to MAX (31).
The volume level is automatically set to 16 when the power is
turned off with the volume level Set to 17 or more.
SUPER T-BASS SYSTEM
The T-BASS system enhances the realism of low-frequency
sound.
Press the T-BASS button.
Each time it is pressed, the level changes. Select one of the
three levels, or the off position to suit your preference.
65
,
T-BASS
To select with the remote controi
press the T-BASS button while pressing the SHIFT button.
Low frequency sound may be distorted when the T-BASS system
is used for a disc or tape in which low frequency sound is
originally emphasized. In this case, cancel the T-BASS system.
Using the headphones
Connect headphones to the PHONES jack with a stereo standard
plug (
06.3
mm, 'k inch).
No sound is output from the speakers while the headphones are
plugged in.
7
ENGLISH
Sound adjustment during recording
The output volume and tone of the speakers or headphones may
be freely varied without affecting the level of the recording.