Aiwa CX-NA31 - Manual (Page 4)

I
CONNECTIONS
Check your system and accessories
NSX-A31
® CX-NA31 Compact disc stereo cassette receiver
® SX-FNA51 Front surround speakers
® CX-NA31 Compact disc stereo cassette reciver
@ SX-NA34 Front speakers
® SX-R210 Surround speakers (For NSX-A34 Only)
Common
Remote control AM antenna FM antenna
Operating Instructions, etc
Owner’s record
For your convenience, record the model number and serial
number (you will find them on the rear of your set) in the space
provided below. Please refer to them when you contact your
Aiwa dealer In case of difficulty.
Model No. Serial No. (Lot No.)
CX-NA31
SX-FNA51 (NSX-A31 only)
SX-NA34 (NSX-A34 only)
SX-R210 (NSX-A34 only)
Before connecting the AC cord
The rated voltage of your unit shown on the rear panel Is
120 V AC. Check that the rated voltage matches your local
voltage.
IMPORTANT
Connect the speakers, antennas, and all optional equipment first.
Then connect the AC cord in the end.
To position the antennas
FM feeder antenna:
Extend this antenna horizontally in aT-shape and fix its ends to
the wail.
AM loop antenna:
Position for the best reception.
To stand the AM antenna on a surface
Fix the claw to the slot.
NOTE
» Be sure to connect the speaker cords correctly. Improper
connections can cause short circuits in the SPEAKERS
terminals.
•• Do not leave objects generating magnetism near the speakers
as these object may be damaged.
• Do not bring the FM antenna near metal objects or curtain rails.
• Do not bring the AM antenna near other optional equipment,
the stereo system itself, the AC cord or speaker cords, since
noise will be picked up.
• Do not unwind the AM antenna wire.
To connect with NSX-A31 -> page 4.
To connect with NSX-A34 -► page 5.
3
ENGLISH